Attack structural vulnerability of power grids: A hybrid approach based on complex networks

Power grids have been studied as a typical example of real-world complex networks. Different from previous methods, this paper proposes a hybrid approach for structural vulnerability analysis of power transmission networks, in which a DC power flow model with hidden failures is embedded into the traditional error and attack tolerance methodology to form a new scheme for power grids vulnerability assessment and modeling. The new approach embodies some important characteristics of power transmission networks. Furthermore, the simulation on the standard IEEE 118 bus system demonstrates that a critical region might exist and when the power grid operates in the region, it is vulnerable to both random and intentional attacks. Finally, a brief theoretical analysis is presented to explain the new phenomena.     

Characterization of Si-added aluminum oxide (AlSiO) films for power devices

Synthesis of Si-added aluminum oxide (AlSiO) films is attempted as an insulating film with both a wide bandgap and a high dielectric constant. Electrical characteristics of AlSiO films are investigated. Leakage current of the AlO film is suppressed by Si addition and is minimized with Si composition ratio of 12%. Capacitance versus voltage (C-V) measurements are carried out for Au/AlSiO/Si MIS structure. Both flat band shift and hysteresis of the C-V characteristics are suppressed by Si addition. A low leakage current is demonstrated for Au/AlSiO/n-SiC MIS structure.     

Inter-cell spectrum efficiency improvement technology

Improvement in inter-cell spectrum efficiency is a valuable research topic in mobile communication system, which affects cell edge user experience especially. According to current research results, there are three methods to deal with inter-cell interference to improve inter-cell spectrum efficiency, including inter-cell interference randomization, inter-cell interference cancellation and inter-cell interference coordination. This paper analyzes three important inter-cell spectrum efficiency improvement technologies, soft frequency reuse (SFR), uplink power control, and downlink coordinated multi-point transmission/reception (CoMP), and relative research progress.     

Lp(Rn,udx)中极大算子Mw的强型不等式及对Riesz位势的应用

相当A     

Evolution of groups with a hierarchical structure

The universal occurrence of a hierarchical structure and its dynamic behavior in various types of group, living or abstract, are discussed. Here the word “group” refers not only to tangible aggregation but also to invisible aggregation of social psychological and of geopolitical meaning. The evolution of these groups is simulated using a model of agents distributed on the lattices of cellular grids. It is assumed that agents, fearing isolation, interact asymmetrically with each other with regard to exchange of “power”. As an indicator of hierarchy, the Gini coefficient is introduced. Example calculations are made for the aggregation, fusion and fission of animal groups, and for the appearance of a powerful empire and the rise and fall of supremacy. It is shown that such abstract objects evolve with time in accordance with the universal rules of groups common to birds and fish.     

应用于染料敏化太阳能电池的基于染料R6的含有不同吸电子基团的有机染料的理论研究

Dye-sensitized solar cells (DSSCs) are the most promising alternatives to traditional fossil energy because of their advantages of low production cost, facile structure, relatively low environmental impact, relatively high photoelectronic absorption efficiency, and overall high efficiency. In addition, several studies on sensitizers as vital components have been conducted over the last three decades. Compared to metal dyes, metal-free organic dyes have been considered as promising candidates because of their simple fabrication, multiple structures, high molar absorption coefficients, easily tunable properties, and environmental friendliness. In this study, we systematically investigated the optoelectronic properties of six metal-free organic donor-acceptor dyes (RD1–6) derived from the known dye R6 by using the density functional theory (DFT) and time-dependent DFT methods. Cell performance parameters were discussed, including the geometrical and electronic structures, absorption spectrum, adsorption energy, light harvesting efficiency (LHE) curve, predictive short circuit current density (J_sc^Pred.), predictive open circuit voltage (V_oc^Pred.), and theoretical power conversion efficiency (PCE). Results revealed that all the designed dyes exhibited high theoretical PCE. In particular, dyes RD1, 2, and 4–6 showed greater conjugations, and dyes RD1–3 had smaller energy gaps than those of the reference dye. In addition, dyes RD1–3, 5, and 6 exhibited better light harvesting capacities that covered the entire visible region and extended to the near-infrared region with obviously red-shift maximum absorption wavelengths (λ_max), wider LHE curves, and higher J_sc^Pred. as compared to the reference dye. It was critical that dyes RD1 and 2 not only have greater conjugations and narrow band gaps but also good light harvesting capacities with more than 56-nm red-shift maximum absorption wavelengths and broadened LHE curves than those of the reference dye. Notably, mainly because of an average increment of 12.0% of J_sc^Pred., a remarkable increment of the theoretical power conversion efficiency was observed from 12.6% for dye R6 to 14.1% for dyes RD1 and 2. Thus, dyes RD1 and 2 exhibited superior cell performances and could be promising sensitizer candidates for highly efficient DSSCs. These results could be used to guide effective synthetic efforts in the discovery of efficient metal-free organic dye sensitizers in DSSCs.     

镁热还原CO2气体制备介孔石墨烯及其电容特性研究

以CO_2为原料,采用金属镁热还原法,制备出富含介孔结构的石墨烯材料。分别利用X射线衍射、扫描电镜、透射电镜、拉曼光谱和N_2吸附-脱附等测试手段对材料的微观结构进行了表征。通过在镁粉中加入不同质量的MgO,可以实现对石墨烯形貌和孔结构的调控,当MgO/Mg质量比为8∶1时,产物(MRG-8)具有均一的介孔结构(4nm)。并对材料的电化学性能进行了测试,在1mol/L KOH的电解液中,MRG-8具有最高的比电容(171F/g),同时具有非常好的倍率特性,循环测试12000周,比电容保持率为94%。当采用[EMIM][BF4]离子液体作为电解液,以MRG-8为电极材料组装成的对称型超级电容器显示出超高功率密度(175k W/kg),对应的能量密度为28.1Wh/kg。因此,采用此方法制备的介孔石墨烯材料在高功率的超级电容器领域具有潜在的应用前景。     

Thermosonicated whey protein concentrate blends on quality attributes of reduced fat Panela cheese

Aiming at producing a reduced fat cheese (RFC) as an alternative to full-fat Panela cheese, a highly consumed fresh Mexican dairy product, thermosonication (TS) processes (24 kHz, 400 W nominal power, 2, 4 and 6 min; 50, 55 and 60 °C) were evaluated to treat WPC (80% protein) blended with reduced-fat milk (1 and 2% fat), which were later LTLT pasteurized. TS blends were compared in terms of their technological properties (water holding capacity-WPC, gel firmness- GF, color, pH and titratable acidity) with those of a regular full fat (3%) LTLT pasteurized milk used as a control. Afterwards, a regression analysis was carried out with the obtained data in order to select the most appropriate conditions for cheesemaking purposes (similar GF, higher WHC with respect to the control), minimize both fat content and TS treatment duration to minimize energy expenses. According to these restrictions, the selected conditions were 1.5% fat milk-WPC blend, TS treated at 60 °C for 120 s; 1% fat milk-WPC blend, TS treated at 50 °C for 120 s and 1% fat milk-WPC blend, 50 °C for 144 s, which allowed preparing low fat cheeses (LFCs). These TS treatments were applied in a larger scale to elaborate Panela-type LFCs comparing different technological properties (cheese yield, syneresis, water content, texture profile analysis, color and titratable acidity) with those of a full fat variety, at day 1 and during 14 days of refrigerated storage. Results showed similar texture profiles of LFC cheeses and full fat milk cheeses throughout their storage period with significant changes in composition parameters (higher moisture, protein and salt contents, with low fat percentages), syneresis, selected color parameters (hue, b*), with no observed changes in cheese yield, TA and pH during cheese storage. These promising results are encouraging to develop LFCs with no physicochemical or technological defects using novel processing techniques that may help reducing calorie consumption without compromising sensory acceptability.